LAB PUTTY & DUPLICATING SILICONES

2,5 Kg + 2,5 Kg Catalyst  

Setting time (at 23°C): 4’30”

Vinyl polysiloxane based, addition-curing material, exclusively designed for extra oral use in the dental laboratory. Ormaplus Lab performs high dimensional stability and an extraordinary precision in details reproductions.

• Perfect compability with self and heat curing acrylic resins.
• High heat resistance without alterations.
• High precision in detail reproduction.
• Hardness (after 24h): 90 (±3) Shore-A.
• Recovery from deformation: 99,5%.
• Mixing ratio: 1:1.
• Linear dimensional change: – 0,05%.
• Perfect compability with self and heat curing acrylic resins.
• High heat resistance without alterations.
• High precision in detail reproduction.

INTENDED USE
Matrices for fixed and total prosthesis.
Duplications.
Prosthesis repair.
Matrices for temporary crowns and bridges.
CAD compatibility.

Ormalab 85 (5 kg) + 2 Ormactivator (60 ml) 

Working Time (at 23°C): 3′00″

Setting Time (at 23°C): 12′00

A polysiloxane based, condensation curing material, exclusively designed for extra oral use in the dental laboratory. Ormalab 85 is useful whenever high quality performances are required. CAD compatible material. 

• Perfect compatibility with cold-curing acrylic resins.
• High heat-resistance: over 110°C without alterations.
• High precision in details reproduction.
• Long lasting dimensional stability.
• Very high compressive strength and recovery from deformation.
• Final hardness (after 24 h): 85 (±3) Shore A
• Shelf Life: 3 years

INTENDED USE
Counter-mould for removable prosthesis in heat-curing resins
Masks for composite and polyglass composite provisional
Masks for gingival reproduction in indirect technique
Masks for prosthesis in self-curing resins
Repair of removable prosthesis

1 kg Base + 1 kg Catalyst

Working Time (at 23°C): 3′00″

Setting Time (at 23°C): 12′00″

Vinyl polysiloxane based, addition-curing duplicating material for laboratory use.

ORMADUPLO 22 has been specifically formulated to meet any lab technician’s requirement when working with removable or fixed prosthesis. It allows to achieve perfect and bubble free model duplications with an optimal details reproduction and a long lasting dimensional stability, for perfect results even in the most difficult situations.
The high elasticity and tearing resistance make removal of the model from the silicone an easy and safe task.

• Mixing Ratio (Base : Catalyst): 1 : 1
• Final Hardness (after 24 h): 22 (±1) Shore A
• Recovery from deformation: 99,95 %
• Linear dimensional change: – 0,05 %
• Shelf Life: 2 years

Catalyst gel suitable for condensation curing silicones for dental laboratories, specifically formulated to be used with Ormalab silicones. 

• Color: Red.
• Size: 60 ml. tubes

• Multi purpose, Kneadable, high viscosity, condensation curing silicone
• Non-greasy, highly accurate and odorless.
• Can be used in heat-cure process.
• Shore A hardness 85.
• 2.6kg + 60ml activator.
• Made in Germany

• Multi purpose, Kneadable, high viscosity, condensation curing silicone
• Non-greasy, highly accurate and odorless.
• Can be used in heat-cure process.
• Shore A hardness 85.
• 10kg + 4 Activators
• Made in Germany

• For use with all condensation curing lab putties
• Non-Greasy
• 60ml tube
• Made in Germany

• Multi purpose, condensation curing
• High quality, non-greasy, fast setting.
• Shore A 70 hardness
• 1.5kg + 1 x 40g activator.
• Made in Germany

• 2 part Lab Putty
• Especially suitable for heat-cure process
• Shore A 90 hardness
• Very low shrinkage less than 0.01%
• Addition curing (1:1) lab putty.
• 2 x 1.5kg tubs.
• Made in Germany.

• 2 part Lab Putty
• Shore A 90 hardness/li>
• Especially suitable for heat-cure process
• Very low shrinkage less than 0.01%
• Addition curing (1:1) lab putty.
• 2 x 9 kg tubs.
• Made in Germany

• Shore A22
• Multi-purpose
• Fast set, 30 minutes
• Pourable addition curing (1:1) duplicating silicone.
• Consistent, smooth moulds.
• 2.4kg. 2 Part - A & B

• Shore A22
• Multi-purpose
• Fast set, 30 minutes
• Pourable addition curing (1:1) duplicating silicone.
• Consistent, smooth moulds.
• 4 x 2.4kg. 2 Part - A & B